2FD Double-Wide Four-Post Car Lift – Buyer's Guide
The KETTP 2FD stores 4 vehicles in the footprint of 2. Its dual-platform design elevates two vehicles side-by-side on the upper level while two more park freely below — all supported by just 4 structural posts, eliminating the extra center columns two separate four-post lifts would require.
Specifications
- Rated capacity: 4,000 kg (8,820 lbs) or 6,000 kg (13,230 lbs) on the upper platform, selectable at order
- Lifting height: 1,800 mm or 2,000 mm standard, 2,100 mm available
- Vehicle capacity: 4 vehicles per unit
- Drive system: single hydraulic cylinder plus synchronized dual steel wire rope, 3kW motor
- Control: 24V DC low-voltage circuit, IP65-rated weatherproof enclosure
Verified through installation and testing
Every 2FD unit is installed and load-tested before it ships, confirming stability and reliability under the dual-platform load before it reaches the buyer's site.
Safety and warranty
Full-range mechanical anti-falling locks engage at every height increment on all four posts, even during power failure. Dual independent steel wire ropes provide a secondary load path. KETTP backs the 2FD with a 5-year warranty on the steel structure, 18 months on operational and electrical components, and 12 months on hydraulic and transmission parts.
Applications
Classic car collectors, auto dealerships, commercial parking garages, and multi-car households comparing the 2FD against two separate four-post car lifts typically choose it to reach the same 4-car capacity with half the structural posts.
View full specifications and request a quote for the KETTP 2FD.
